RV BLIND SPOT FOR TOWABLES
FOR TOWABLES
WHY YOU'LL LOVE CUB'S BLIND SPOT DETECTION SYSTEM

Audio & Visual
Audio and Visual alerts make it easier to be aware of your blind spots as you are towing.
OBD-II Technology
The OBD-II connector speaks to the on-board diagnostics system in your vehicle. Feel safer knowing that you’ll be getting the most accurate reading from the system at all times.
Rear Cross Traffic
Rear Cross Traffic Alert is capable of monitoring rear cross traffic zones up to a 60 ft range.
WORRY-FREE DRIVING

Warning Zone
The system’s warning zone covers left and right adjacent lanes with up to 75 feet of range.

Reliable Detection
Reliable detection even in areas with low reception such as tunnels or mountainous locations.

Strong Radar Signal
24GHz frequency for a strong radar signal & complies with the ISO 17387 Type 3 system standards.
FREQUENTLY ASKED QUESTIONS
Yes, it can be installed on nearly any trailer.
No, we do not rely on a GPS signal to function.
The complexity really depends on the coach itself and if a trailer system, the tow vehicle. Based on our past installs and customer reported information, it could be as quick as 2 hours including the tow vehicle.
Most of your time is spent just routing the cables and securing them, as we only make 4 required connection points plus one optional connection. One of them is a direct plug into the OBD-II port which is as easy as it gets.
The system uses 24GHz radar technology, the same technology that is found in many of your modern cars.
Easy Installation
Most everything you need comes in the box. You will need your basic tools for installation. The trailer installation happens in 7 easy steps.

Lane Change Alert
When your turn signal is on, you’ll hear an audible tone and see the LED light blink making it extremely easy to know whether or not you can make a safe lane change. The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds.

Durability
The CUB Blind Spot Detection System is built to last in any weather and any time of year, it is ASTM D4329 tested for years of durability in the sun. All parts are available as service parts for replacement if damaged.

Easy Installation
Most everything you need comes in the box. You will need your basic tools for installation. The trailer installation happens in 7 easy steps.


Lane Change Alert
When your turn signal is on, you’ll hear an audible tone and see the LED light blink making it extremely easy to know whether or not you can make a safe lane change. The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds.
Durability
The CUB Blind Spot Detection System is built to last in any weather and any time of year, it is ASTM D4329 tested for years of durability in the sun. All parts are available as service parts for replacement if damaged.

Are You Ready To Install Your Best Partner On The Road?
We’re committed to making the road a safer place for you. Our RV Blind Spot Detection System is always looking out for you and your family.