BLIND SPOT FOR MOTORHOMES
FOR MOTORHOMES
WHY YOU'LL LOVE CUB'S BLIND SPOT DETECTION SYSTEM

Audio & Visual
Audio and Visual alerts make it easier to be aware of your blind spots as you are driving.
OBD-II Technology
The OBD-II connector speaks to the on-board diagnostics system in your vehicle. Feel safer knowing that you’ll be getting the most accurate reading from the system at all times.
Rear Cross Traffic
Rear Cross Traffic Alert is capable of monitoring rear cross traffic zones up to a 60 ft range.
WORRY-FREE DRIVING

Warning Zone
The warning zone of the system covers left & right adjacent lanes with up to 75 feet of range & is automatically activated when the vehicle exceeds 15 MPH.

Reliable Detection
Reliable detection even in areas with low reception such as tunnels or mountainous locations.

Strong Radar Signal
24GHz frequency for a strong radar signal & complies with the ISO 17387 Type 3 system standards.
FREQUENTLY ASKED QUESTIONS
Yes, it can be installed on nearly any motorhome.
No, we do not rely on a GPS signal to function.
This is an intermediate level DIY project because you need to make electrical connections.
The system uses 24GHz radar technology, the same technology that is found in many of your modern cars.
Easy Installation
Most everything you need comes in the box. You will need your basic tools for installation. The trailer installation happens in 7 easy steps.

LED INDICATOR LAMPS
Blind Spot Detection: LED indicator lamps will illuminate to notify the rider of vehicle to increase rider awareness to surrounding traffic conditions.
Lane Change Assist: When turn signal is activated, LED indicator lamps will flash to notify the rider of a vehicle in blind spots during lane change.

HAPTIC FEEDBACK
Lane Change Assist: In addition to the flashing LED lamps, there is haptic feedback to the seat to ensure confirmation to the driver when it is unsafe to make a lane change. This will reduce accidents due to missed vehicles.

Easy Installation
Most everything you need comes in the box. You will need your basic tools for installation. You can find our installation manuals in the box or here on our website in the bottom navigation menu.


Lane Change Alert
When your turn signal is on, you’ll hear an audible tone and see the LED light blink making it extremely easy to know whether or not you can make a safe lane change. The warning zone of the system covers left and right adjacent lanes with an estimated impact in less than 2 seconds.
Durability
The CUB Blind Spot Detection System is built to last in any weather and any time of year, it is ASTM D4329 tested for years of durability in the sun. All parts are available as service parts for replacement if damaged.

Are You Ready To Meet Your Best Partner On The Road?
We’re committed to making the road a safer place for you. Our RV Blind Spot Detection System is always looking out for you and your family.
